Clipfix Fasteners
& Framing

Clipfix Fasteners make it so quick and easy to install your new deck.

Available in both Glass-Filled Nylon and Stainless Steel options, Clipfix Fasteners gives your deck a clean, modern finish without any visible screws.

Browse our products below:

CLIPFIX – GLASS FILLED NYLON – HIDDEN SCREW FIXING

Using the Clipfix Glass Filled Nylon system will provide a consistent 6mm gap between boards.

  1. Insert the Clipfix clip into the groove as shown.  Screw down approximately 4 mm to hold the clip in place.
  2. Get your next board and push into place.
  3. Repeat these steps and lay approximately five boards. Ensure your boards are square, adjust as necessary.
  4. Screw down the aligned decking. Do not overtighten, use a low medium torque setting on your drill.
  5. Repeat steps 1 – 4 until you have completed your project.

CLIPFIX – Stainless Steel – HIDDEN SCREW FIXING

Using the Clipfix Stainless Steel system will provide a consistent 4mm gap between boards.

  1. Insert the Clipfix premium clip into the groove as shown.
  2. Align board into position.
  3. Screw down the aligned decking. Do not overtighten, use low medium torque setting on your drill.
  4. align second board and push/clamp onto previously screwed clip.
  5. repeat steps until you have completed your project.
Composite Framing

Composite Framing

Clipfix 40mm x 30mm Composite Framing is the perfect joist solution when building a deck over an existing slab.

Simply fix the composite framing to your existent slab and then fix Ultradeck Decking Boards to the Clipfix Composite Framing.

ColourSize
Black30 x 40 x 3000 mm